 Complete Info
Form
|
|
Low Profile (Side Connection) Accelerometers
Low profile accelerometers offer many advantages over top-connector style accelerometers; the lower profile effectively eliminates
the connector / cable dimension from the combined height of the mounting magnet, sensor and connector / cable assembly used for
periodic analysis. Measurements can now be performed more easily in tight places such as between drive and driven equipment.
In permanently mounted applications, the low profile sensor offers more mounting flexibility while allowing the installer to position
the cable exit from the sensor in the most desirable direction.
"Now with Lifetime Warrantee"
 |
 |
 |
 |
|
| 797 */**
|
787A **/***
|
SNAP
|
785A
|
|
| Rating | BEST | BETTER | LIGHT DUTY | GOOD |
| Sensitivity | 100 mv/g | 100 mv/g | 100 mv/g | 100 mv/g |
| Ceramic Sensor | shear | shear | shear | shear |
| Freq. Response | 1.0 - 12 kHz | 0.7 - 10 kHz | 0.5 - 10 kHz | 1.0 - 12 kHz |
| Broad Band | 600 ug | 700 ug | 700 ug | 1,260 ug |
| Temp. Rating | -50° to 120° | -50° to 120° | -50° to 85°C | -50 to 120 deg C |
| Housing / Rating: | 316L SS CSA Approved |
316L SS CSA & IECEx Certified |
316L SS | 316L ss |
| Elect. Conn. | 2-pin side | 2-pin side | SMB | 2-pin, angled |
| Mounting: | 1/4-28 NPT | 1/4-28 NPT | stud or adhesive | 1/4-28 NPT |
| captive screw | captive screw | 1/4-28 NPT | captive screw | |
* available in 150°C high temp. or low frequency configurations ** available with CSA Intrinsically Safe Approval *** available with integral 16' cable, however not with CSA IS approval in this configuration
|
||||